Custom Target stock
£120 inc postage, UK only
Custom grip target stock, ambidextrous suitable for left or right hand. Height adjustable cheek
piece and shoulder pad, also adjustable for length of pull. This stock will fit CP1, CP2, PP800 ,
Diana Chaser and Diana Bandit. Picatinny rail is molded into the forestock. Click images to enlarge. Bipod not included.
Specifications :
Trigger to buttpad (LoP) 360mm to 395mm
Cheekpiece travel 30mm
Buttpad travel 90mm (7 positions)
Weight 630 g
Target match grip
£30 UK only
Match style pistol grip for the Artemis/Victory CP2, CP1 and PP800
Also fits the Diana Chaser
With adjustable palm rest to lock your hand in place.
Fits with one single screw (supplied)
Ergonomic and shaped to fit in the palm
Reduces strain, allows longer shooting sessions.
If the CP1 pistol is fitted, there is a spacer and 4x12mm
countersunk screw provided to fill the gap at the back of the action.
Click to enlarge the pictures. Click the Ebay button to buy
(Stand is not included)
Adjustable Cheekpiece
£35 UK only
CP2 adjustable cheek piece, 3D printed
Fits snuggly in the original stock with no modifications
Held in place with 4 buttons, no drilling required
Top of cheek rest is angled to be in line with the sights
Stops your head from "floating" behind the scope
The clamp wheel can be fitted to either left or right hand side
Click the pictures to enlarge. click the Ebay button to buy
Be sure to check the fitting instructions
Single Shot Loader
£18 UK only
Single shot adapter to fit the CP2, PP800, PR900W.
Available in 0.22 and 0.177 with the option to swing open on the left or right hand side of the action. Ideally the swing out side should be the same as the bolt, LEFT for CP2 and RIGHT for PR900W but either option is possible.
Click on picturs to enlarge, Click Ebay button to buy
Adjustable Buttpad
£25 UK only
CP2 adjustable butt pad, 3D printed
Fits snuggly over the original shoulder pad with no modifications
Held in place with a single screw
Can be fitted along with my cheek riser or on its own
If fitted without the cheek riser, the included spacer must be used.
To fit the butt pad, lower it down from above the stock
Push forward over original pad and secure with the provided bolt.
Then simply adjust the sliding pad height and secure with a single cap head
Please do not over tighten the adjusting screw, it only needs a gentle nip.
Click the pictures to enlarge. Click the Ebay button to buy.
Be sure to check the fitting instructions.
Picatinny Rail
£16 UK only
Picatinny rail that mounts to the stock of the CP2, contoured to fit exactly.
This rail is designed for the attachment of bipods, torches etc
Its is not designed to support the weight of the gun on a shooting stick.
Clips at the front hold on the swage line of the stock and then retained
with a longer mounting screw (supplied) through the trigger guard.
Click on pictures to enlarge, Click Ebay button to buy.