Bob Pattenden
3D printed stocks and shooting accessories
Notice:
Due to other work commitments I’m currently taking a short break from my stocks and some shooting accessories until March 2026, so online purchases are temporarily unavailable. You’re still welcome to browse the website and explore all items — but I’m not taking any direct orders at the moment. My eBay sales remain largely active and unaffected, so you can continue buying through my eBay store in the meantime. Thanks for your understanding and support!
Royal Mail Update:
Please note that my eBay shop will be closed during December. The Royal Mail service becomes extremely busy over the holiday period, and unfortunately, too many parcels go missing or are delayed. To avoid issues and losses, I’ll be pausing sales until the new year.
Thank you for your understanding and patience!
Step 1
Fit the front and rear sections together and fasten with two M5x16 button head screws and flat washers
Step 2
Fit he S200 action in the stock and fasten with the M4x16 cap head from underneath and the M5x10 button head screw on the right hand side.
There is no need to use the long fixing stud that passes through the pistol grip but the option is there.
Step 3
Next fit he hamster with either of the different height spacers using the M5x70 countersunk screws. The hamster can be mounted directly without any spacers using the M5x40 countersunk screws. If you choose to use the stock without any hamster, please fit the M5x16 button head screws directly in the underside of the stock.
Step 4
Now fit the cylinder support using M5x20 cap head, This supports the cylinder and allows the barrel to free float .
